How to Remove Wax Out of Carpet: The Ultimate 2024 Guide

If you’ve ever had a candle spill on your carpet, you know how frustrating it can be to get the wax out. It seems to get everywhere, and it’s hard to tell which bits are actually wax and which are just fibers from your carpet.

In this guide, we will teach you how to remove wax from your carpet quickly and easily. We’ll show you how to gather your materials, blot the wax, vacuum it up, and more!

How to Get Wax Out of Carpet

What you’ll need:

• paper towels or a clean cloth
• a dull knife (like a butter knife)
• a vacuum cleaner with the brush attachment
• iron (optional)
• carpet shampoo or stain remover (optional)

Before you start, it’s important to understand that there are two types of wax: soft and hard. Soft wax is made from petroleum and is used in things like candles and lip balm. Hard wax is made from beeswax and has a much higher melting point. It’s often used in furniture polish and floor wax. For the purposes of this guide, we’ll be focusing on soft wax since it’s more common and easier to clean. With that said, let’s get started!

Blot the Wax

If the wax is still wet, start by blotting it with a paper towel or clean cloth. Apply pressure to soak up as much wax as possible. If the wax has already cooled and hardened, you can skip this step.

Scrape It

Next, use a dull knife to scrape away any excess wax that’s remaining on the surface. Be careful not to damage your carpet while you’re doing this.

Vacuum the Carpet

Once you’ve removed as much of the wax as possible, it’s time to vacuum up the remainder. Use your vacuum’s brush attachment to gently go over the affected area. This will help lift any remaining bits of wax out of the carpet fibers.

If there are still some stubborn pieces of wax remaining, you can try using an iron. Put a clean cloth over the wax and press the iron down on top of it. The heat will cause the wax to melt and stick to the cloth. You can then peel the cloth away, taking the wax with it.

How Do You Get Wax Out of the Carpet with a Hair Dryer or an Iron?

If you’re wondering how to get wax out of carpet with a hair dryer or an iron, the answer is simple: heat! Applying heat to the wax will cause it to melt and stick to whatever surface you’re using. This can be a paper towel, a clean cloth, or even another piece of carpet. Just be careful not to damage your carpet while you’re doing this.

Hair Dryer Method

Start by blotting up any excess wax with a paper towel or clean cloth. If the wax is already hardened, you can skip this step.

Next, put your hair dryer on the lowest setting and hold it about six inches away from the wax. Slowly move the hair dryer back and forth over the wax until it’s melted.

Be sure to keep the hair dryer moving so you don’t damage your carpet. Once the wax is melted, blot it up with a paper towel or clean cloth.

Iron Method

Start by placing a clean cloth over the wax. Make sure the cloth is big enough to cover the entire affected area.

Next, put your iron on the lowest setting and press it down onto the cloth. Hold it in place for about 15 seconds to melt the wax.

Carefully lift the iron and check to see if the wax has transferred to the cloth. If not, repeat this step until all of the wax has been removed. Once you’re finished, vacuum up any remaining bits of wax from your carpet.

Carpet Shampoo or Stain Remover

If you’re still struggling to remove the wax, you can try using a carpet shampoo or stain remover. These products are designed to break down and remove tough stains from carpets.

To use this method, start by blotting up any excess wax with a paper towel or clean cloth. If the wax is already hardened, you can skip this step.

Next, apply the carpet shampoo or stain remover to the affected area and let it sit for about five minutes. This will give the product time to break down the wax.

After five minutes have passed, blot up the area again with a paper towel or clean cloth. You may need to repeat this step a few times to remove all of the wax.

As a last resort, you can try using WD-40 or another type of lubricant. Apply the WD-40 to the affected area and let it sit for about five minutes. This will help break down the wax and make it easier to remove.

Once you’ve removed as much of the wax as possible, vacuum up the remainder.

How Do You Get Wax Out of the Carpet Without Heat?

There are a few ways to remove wax from carpet without using heat. One option is to use a commercial cleaner specifically designed for removing wax. Follow the directions on the product label. Another option is to make a natural solution by mixing one part white vinegar with two parts water. Apply this solution to the stain and blot it up with a clean cloth or paper towel.

FAQ

How do you remove hard wax from carpet?

The best way to remove hard wax from carpet is to use a hair dryer or an iron. Simply apply heat to the wax and blot it up with a clean cloth. You may need to repeat this process a few times to remove all of the wax.

How do you get candle wax out of synthetic carpet?

The best way to remove candle wax from synthetic carpet is to use a commercial cleaner specifically designed for removing wax. Follow the directions on the product label. Another option is to make a natural solution by mixing one part white vinegar with two parts water. Apply this solution to the stain and blot it up with a clean cloth or paper towel.

How do you get melted crayon wax out of carpet?

The best way to remove melted crayon wax from carpet is to use a hair dryer or an iron. Simply apply heat to the wax and blot it up with a clean cloth. You may need to repeat this process a few times to remove all of the wax.

The Bottom Line

There are a few different ways to remove wax from carpet. The best method will depend on the severity of the stain and the type of carpet you have. If you’re struggling to remove the wax, you can always call in a professional cleaner. They will be able to help you get your carpet looking like new again.